Home Guardian 2.0 – Installation and Initial Setup
Follow these steps to install the Home Guardian 2.0.
- Make sure the ac power adaptor is securely connected to the back of the device.
- Plug the power adaptor into a direct wall socket that is not connected to a light switch. Avoid any power strips or power cords.
- After power is supplied, press the power button once to power on the device. The red power button is located on the back of the device by the power cord.
- The info button will flash amber until it turns solid green.
- When the device connects to the network, it will verbally state, “Device ready.“
![home-guardian-red-power](https://staging.medicalguardian.com/wp-content/uploads/2023/07/home-guardian-red-power.png)
![home-guardian-power-adapter](https://staging.medicalguardian.com/wp-content/uploads/2023/07/home-guardian-power-adapter.png)