Home MGMini Lite – Parts Identification MGMini Lite – Parts IdentificationCharging Cradle Charging Pins Red LED Power Indicator The cradle and power cord are connected. No assembly is required.

Home MGMini Lite – Powering On/OffMGMini Lite – Powering On/OffPowering On the Mini Lite To power on the Mini Lite, plug the charging cradle directly into a wall outlet. (In order to ensure the cradle is receiving sufficient power avoid power strips, extension cords,...

Home Home Guardian CBS – FAQsHome Guardian CBS – FAQsTo power on the Home Guardian CBS: Simply place the power adaptor into a wall outlet not controlled by a light switch. Turn the device on using the on/off switch on the back of the device After a few seconds, the...

Home Home Guardian CBS – Lockbox SetupHome Guardian CBS – Lockbox SetupA spare key to the home is kept in the lockbox and secured somewhere outside of the home (usually the front door). In the event of emergency dispatch, our operators will provide the code to the...

Home Home Guardian CBS – Best PracticesHome Guardian CBS – Best PracticesThe base unit can detect a button press within a 600 ft range from the base device. Help can still be sent if you aren’t able to communicate with the monitoring center and you are within 600 ft...

HomeHome Guardian CBS – TestingHome Guardian CBS – TestingIt is recommended to test your device and pendants monthly to ensure they are working properly.Follow the steps below to test your device and pendants. Press the transmitter button firmly and release. The...

Home Home Guardian Home Guardian LT – Fall DetectionHome Guardian CBS – Fall DetectionFall Detection can provide peace of mind knowing that our monitoring center will receive a signal to send help without the push of a button for additional $10.00 monthly. Fall...

Home Home Guardian CBS – Button PairingHome Guardian CBS – Button PairingGather any/all buttons: Take the buttons over to the base station. The base station needs to be plugged in and powered on. Press and HOLD the red emergency button until you hear the device say...

Home Home Guardian CBS – Parts Identification and Light IndicatorsHome Guardian CBS – Parts Identification and Light Indicators ​​​​Press and Release to Send Call for Help Light will always be illuminated Red Reset Button- Blue​ ​​​​​Will always be illuminated blue...

Home Home Guardian CBS – Initial Setup and InstallationHome Guardian CBS – Initial Setup and Installation Plug the device into a power outlet not controlled by a light switch. Turn the device on using the on/off switch on the back of the device. After a few seconds...